Which industries does Nordmould serve with injection-moulded parts?
Nordmould serves five main sectors across the Baltic and Nordic region: electronics and IoT, medical devices, industrial equipment and machinery, consumer products, and automotive-adjacent components. Each industry is covered from prototype stage through low-to-mid volume production, with free DFM review on every project.
Which sectors does Nordmould work with most?
The table below maps each industry to the parts Nordmould most commonly produces, the materials typically specified, and what the service offers that sector.
| Industry | Typical parts | Common materials | What Nordmould brings |
|---|---|---|---|
| Electronics & IoT | Enclosures, PCB carriers, antenna covers, connector housings | ABS, PC, PC/ABS | DFM for snap-fits and EMC ribs; short runs from 100 pcs; fast bridge tooling |
| Medical devices | Fluid-path components, housings, single-use parts | PP, ABS, PC, TPE | Cleanroom-compatible traceability; ISO 13485 status confirmed at enquiry stage for the relevant production tier |
| Industrial & machinery | Gears, brackets, fluid manifolds, valve bodies | POM, PA+GF, PC/ABS | Engineering-grade materials; insert moulding for metal interfaces; tight-tolerance tooling |
| Consumer products | Appliance shells, handles, packaging, wearable housings | ABS, PP, PMMA, TPU | Surface finish options (matt/glossy/high-gloss); over-moulding; short market-test runs |
| Automotive components | Under-bonnet brackets, interior trim, lighting bezels | PC, POM, PA+GF | EU-manufactured traceability; IATF 16949 status confirmed at enquiry stage for Tier-1 OEM supply chains |
What does Nordmould offer electronics and IoT companies?
Electronics enclosures and PCB carriers demand consistent snap-fit geometry, precise wall thickness and, often, EMC rib patterns. Nordmould's free DFM review addresses these before a single tool is cut. Bridge tooling in aluminium gets first parts in as little as four weeks — fast enough to validate fit with real hardware before committing to a production tool.
Standard materials include ABS for general housings, PC where impact resistance or light transmission matters, and TPE for gaskets and over-moulded seals.
What does Nordmould offer medical device manufacturers?
Medical plastic components — fluid-path parts, housings, disposable assemblies — require documented material traceability and controlled production conditions. Nordmould can support these requirements; projects that require a formally certified quality management system should confirm ISO 13485 status for the relevant production tier at enquiry stage before ordering.
PP and PC are the most common choices for medical-grade parts. Single-use designs in TPE are also supported.
What does Nordmould offer industrial equipment manufacturers?
Industrial and machinery parts often carry mechanical loads, run in contact with lubricants or chemicals, and must interface cleanly with metal fasteners or inserts. POM delivers low friction for gear and bearing surfaces; glass-filled PA handles structural brackets; insert moulding bonds metal threads directly into moulded parts, eliminating secondary assembly.
Tolerances down to ±0.05 mm are achievable on steel tooling in the Production tier.
What does Nordmould offer consumer product companies?
Short market-test runs — common in consumer product launches — are where Nordmould's 100-piece minimum and bridge tooling model prove their value. Surface finish choices (matt, glossy, high-gloss) and PMMA for transparent or near-optical parts broaden design options. Over-moulding with TPE or TPU adds soft-touch grips or protective edges in the same tool cycle.
What does Nordmould offer automotive-adjacent suppliers?
Nordmould is well-suited to automotive aftermarket parts, interior trim components and non-safety-critical brackets where EU manufacturing and documented traceability are required. For Tier-1 OEM supply chains that mandate IATF 16949 certification, confirm certification status at enquiry stage for the relevant production tier.
PC and POM are standard choices for under-bonnet and interior applications; glass-filled PA is available for higher-load structural parts.
Frequently asked questions
Does Nordmould produce parts for medical devices? Yes. Nordmould can produce plastic components for medical devices. Projects requiring regulated medical-device manufacturing should confirm ISO 13485 status for the relevant production tier — contact Nordmould to clarify before tooling.
Can Nordmould handle electronics enclosures with tight snap-fit tolerances? Yes. Electronics housings and snap-fit assemblies are among the most common part types Nordmould produces. DFM review catches tolerance and wall-thickness issues before tooling is cut, avoiding costly rework.
What materials does Nordmould use for industrial and machinery components? For industrial applications Nordmould regularly uses POM, glass-filled PA, and PC/ABS. Engineering-grade materials beyond the standard range are available on request.
Is Nordmould suitable for automotive-adjacent parts? Nordmould is suitable for automotive-adjacent and aftermarket plastic components. Tier-1 OEM supply requiring IATF 16949 certification should be confirmed at enquiry stage for the relevant production tier.
What is the minimum order quantity for consumer product runs? Nordmould accepts orders from 100 pieces, which suits early production and market-test runs for consumer products — well below the minimums most large moulders require.
Can Nordmould overmould soft-touch grips onto rigid parts? Yes. Over-moulding is a standard Nordmould secondary capability. TPE and TPU are stock materials suited to soft-touch grips, seals and ergonomic handles.
Send your part drawing or STEP file for a free DFM review — Nordmould will confirm which industry tier, material and tooling path fits your project.